1 Hydraulic skew angle feeding soft loop
2 90 degree turnabout gear rotary soft loop
3 Special oblique drag style rotary soft loop
4 Micro-motor driver soft loop handle go forward and back off
5 Centralize style air control system
CW-800SDP Fully Automatic High Speed Handle Bag Making Machine
全自动高速手提袋制袋机
1. Single sheet film folding unit (hydraulic auto loading deviec)
2. Double sealing knife device
3. Bottom sealing knife device
4. Triangle folding device
2. Double sealing knife device
3. Bottom sealing knife device
4. Triangle folding device
DescriptionMachine SchematicSample BagAbout us
Technical Parameter：
|
Model |
CW-800ZD |
CW-800LP |
CW-800SP |
CW-800CSD |
CW-800SDP |
|
Length of bag-making（Height of bag） |
250-750mm |
250-750mm |
250-750mm |
250-700mm |
250-700mm |
|
Width of bag-making |
250-600mm |
250-600mm |
250-600mm |
250-600mm |
250-600mm |
|
Top-folding edge |
50-75mm |
50-75mm |
50-75mm |
50-75mm |
50-75mm |
|
Bottom gusset |
20-70mm |
20-70mm |
20-70mm |
20-60mm |
20-60mm |
|
Speed of bag-making |
|
|
|
|
|
|
Soft loop handle bag |
60pcs/min |
60pcs/min |
|
120pcs/min |
100pcs/min |
|
Patch handle bag |
60pcs/min |
|
60pcs/min |
|
100pcs/min |
|
Poly draw handle bag |
65pcs/min |
|
|
|
|
|
Die cut handle bag |
80pcs/min |
80pcs/min |
80pcs/min |
140pcs/min |
120pcs/min |
|
Total power |
13KW |
10KW |
10KW |
10KW |
18KW |
|
Machine weight |
3500kg |
3200kg |
3200kg |
3000kg |
3600kg |
|
Machine dimension [L x W x H] |
8.2 x 3.1x1.87m |
6.2x 3.1 x 1.87m |
6 x 3.1 x 1.87m |
7x 2.2 x 1.95m |
10.2 x2.2x1.95m |
|
Air compressor [not included] |
7HP |
8HP |
8HP |
8HP |
75HP |
■ Because of the non-stop improving of machine and development of new functions, appearance and specification is subject to change without notice.
Fully automatic multifunction plastic soft loop handle shopping bag making machine
Brief Introduction:
Specially design new machine, it is only used for making soft loop handle bag, patch handle bag and die cut handle bag.
Features:
1 The design of soft loop handle bag and patch handle bag in the same side,fast exchange the type of bag
2 Soft loop handle device with 3 pcs servo motor drive
3 The rotary device of patch handle drive dy servo motor
4 Top folding continuous sealing design,the sealing length not be limited
5 Newly design of bag stack and speed down conveyor system
Optional devices:
1 Double lines sealing knife device
2 Bottom sealing knife device
1 The design of soft loop handle bag and patch handle bag in the same side,fast exchange the type of bag
2 Soft loop handle device with 3 pcs servo motor drive
3 The rotary device of patch handle drive dy servo motor
4 Top folding continuous sealing design,the sealing length not be limited
5 Newly design of bag stack and speed down conveyor system
Optional devices:
1 Double lines sealing knife device
2 Bottom sealing knife device
Note:
This model is high speed model, up to 100pcs/min. We also have one normal speed model CW-800Zd model, 60pcs/min.
Common unwinding
1 Unwinding adopt common loading, max diameter of raw rolling material is φ600mm
2 Adopt magnetic powder tension control. Manual adjust the tension
3 Unwinding shaft is heavy-chainplug axle
Top-folding continuously sealing device
1 Top-folding continuously sealing, the width size of bag not be limited
2 Inside heating wire sealing, which is suitable for full colors of bag
3 Adopt import heat wire, steady warming, hard sealing
2 Inside heating wire sealing, which is suitable for full colors of bag
3 Adopt import heat wire, steady warming, hard sealing
Soft loop handle bag device
Patch handle bag device
1 Turn about cylinder control patch
2 With flying knife cutting fast
3 Special pattern sealing mould
4 Micro-motor driver patch go forward and back off
5 Base mould of patch device adopt whole steel plate
2 With flying knife cutting fast
3 Special pattern sealing mould
4 Micro-motor driver patch go forward and back off
5 Base mould of patch device adopt whole steel plate
Heat sealing handle punch
1 High hardness gear steel smooth pillar
2 Air outside waster film blower hopper
3 The whole style rotary 180 degree
4 High hardness alloy aluminium puncher base plate
Side sealing parts
1 Side sealing knife with water cycle cooling system
2 Side sealing knife adopt best of breed material, high temperature heating ametabolic
3 Side sealing knife with concealed style heating tube, temperature steady
Convey collect device
1 Collect table adopt automatic collecting bag feeding (intermission model and continuum model)
2 When the bag reach to a certainty quantity, collect table will move automatically, and continue producing
3 Collect table is driven by Micro-motor reducing servo
Inquiry
If you have any enquiry about quotation or cooperation,please feel free to email us at cwding@zjchuangwei.comor use the following enquiry form. Our sales representative will contact you soon. Thank you for your interest in our products.
