Technical
Parameter:
Modie |
CW-800NJT |
CW-800NJT+W |
Optional Equipment |
Length of bag-making |
750mm |
750mm |
+W Wicketer type collect |
Width of bag-making |
600mm |
600mm |
|
Speed of bag-making |
80-130pcs/min |
100-180pcs/min |
|
Line speed |
60m/min |
80m/min |
|
Bottom gusset |
30-80mm |
30-80mm |
|
Width of the patch film |
145mm |
145mm |
|
Total Power |
16KW |
28.6KW |
|
Machine Weight |
3500KG |
4350KG |
|
Machine Dimension [LxWxH] |
11000 X1900 x2600mm1400 |
1400X1900 x2850mm |
|
Air compressor [not included] |
6HP |
7.5HP |
|
■ Because of the non-stop improving of machine and development of new functions, appearance and specification is subject to change without notice.
CW-800NJT High Speed Automatic Plastic inside Glue Patch Handle carry handbag making machine manufacturer
l Brief introduction:
This machine is able to make side sealing Patch handle bags at high speed 120pcs/min.
l Feature:
1. Flexible glue pasting patch film feeding system, fully automatic (PATENT)
2. Pre-sealing knife, heated on double sides and strong for fusing, to make the bags without deformation
3. The best quality of Italian side sealing knife, Heated to high temperatures not deformation
4.Newly design of sealing knife top lift and turn over system
5.Its designed by heating punching and it's easy to cut off, the waster is excluded automatically.
1. wicket collect unit
Unwinding Part:
1.unwinder adopts hydraulic lifting device,max.diameter of the unwinder is 900mm.
2.Adopts AC frequency motor driving constant tension control,feeding speed is according to the producing speed.
3.Unwinding shaft adopts heavy-chain air shaft.
4.Unwinding device adopts 1600mm triangle folding device, which can be adjustable.
5.Unwinder part has the EPC.
Gluing Patch Part:
1.Patch Film is driven by the host linkage. Gluing,slitting,cutting to sticking,it accomplishes with high speed automatically and at one go.
2.Patch film unwinder is driven by AC motor,initiative unwinding,full automatic constant tension control.
3.Patch film with EPC tracking
4.High rigidity white steel spot cutter
5.Gluing roller is driven by motor,individual adjusting
6.Quantity of gelatinizing is adjustable,ducing producing cost,high capacity.
7.Gluing mode: hot-melt glue device
Handle Part:
1. Handle hole adopts heat punching mould design,easy cutting (cold puncher for optional purchasing)
2. High rigidity puncher,it is easy to maintain mould.
3.Waste film at the puncher is dropping automatically,have locker to collecting the waste film.
4.Puncher size: 20×90mm
Photocell and pre-heating device:
1) Printing Image Tracking adopts SICK-Germany photocell,zero malfunction,sealing and cutting correct.
2) The pre-sealing knife is designed specially with embossed four layers to strengthen the sealing part.
3) Double side heating,double cylinder driven,strong for fusing,and strong for sealing.
Side sealing Part:
1. side sealing knife principal axis transmission belt cylinder lifting and down.
2. Side sealing knife with water cycle cooling system.
3. Turnover heavy-side sealing knife,humanism structure,turn fast,easy for cleaning.1.
Convey collect device:
1. Collect table adopts automatic collecting bag feeding (Intermission mode)
2. When the bag reaches to a certainty quantity,collect table will move automatically,and continou producing.
3. Collect table is driven by AC motor with inverter control
If you have any enquiry about quotation or cooperation,please feel free to email us at cwding@zjchuangwei.comor use the following enquiry form. Our sales representative will contact you soon. Thank you for your interest in our products.