
A pouch machine manufacturer cannot size a machine from a bag name alone. Two buyers asking for “a stand-up pouch machine” can need different builds: one runs 90 micron printed film at 120 pouches per minute, the other 160 micron foil laminate with a slider zipper at 60. What separates a good recommendation from an expensive mistake is the information sent before the quotation.
The format decides the machine architecture, so describe the bag the way your converter does:
● Flat three side seal — samples, powders, hardware; the compact CW-400MCP mini center sealing pouch machine covers this family.
● Stand-up / doypack — a bottom gusset must be formed and sealed, which changes the sealing section.
● Square bottom, eight side seal — coffee, pet food, detergents; run on a platform such as the CW-700SQB square bottom pouch making machine.
● Zipper, spout, valve, handle — extra stations with their own tolerances; our laminated pouch making machine series spans all four families.
Send the laminate structure, not “plastic film”, and the finished size rather than the film cut length:
● Layer stack and sealant — PET12/AL7/PE80, PET12/VMPET12/PE70 or mono PE/PE; LDPE, LLDPE, CPP or metallocene sealant drives heat, pressure and dwell.
● Width, height, gusset depth and tolerance in millimetres, plus fill weight: 20 g powder, 500 ml liquid and 2 kg pet food need different seal strength.
● 50 to 100 real pouches reveal gusset folding and seal width better than any drawing.
● Zipper — press-to-close, slider or double track, applied in-line or as pre-made strip; spout — diameter, height, center or corner, inserted or welded.
● Valve, handle, euro hole, tear notch — each a punching tool that must be quoted.
A zipper build is a different machine, which is why the CWZD-600C+FD doypack pouch machine is a multifunction platform for plain, zipper and single-sheet doypack formats.
● Pouches per shift plus year one and year three volume; ask what efficiency the quoted speed assumes, because 200 pcs/min at 75 percent is 150 in your plan.
● Lanes and film — one lane for large pouches, two to four for small flat ones; for printed film send eye mark pitch, print direction and registration tolerance.
● Power and site data — 380 V three phase 50 Hz, 415 V, 220 V single phase or 440 V 60 Hz, since cabinets are built to order; add air pressure, floor space and CE or UL requirements.
● Written pass criteria — run your film and pouch, and agree seal strength, registration and one-hour output before shipment.
Send six blocks, get one accurate recommendation.
Pouch format, film structure, dimensions, hardware, output and utilities: our engineers reply with the machine family, lane configuration and realistic speed before any quotation.
Pouch format, film structure with thickness, finished dimensions, target output and electrical supply. Zipper and printing details refine the quotation but rarely change the family.
Send both. A drawing cannot show gusset folding quality, seal width consistency or laminate stiffness, and those decide whether the machine holds the quoted speed.
Thicker laminates need longer seal dwell, higher pressure and stronger tension control, so a machine sized for 60 to 90 micron runs 160 micron foil slower.
Usually no, because the gusset forming section is structural. Multifunction platforms switch between plain, zipper and doypack; high volume suits a dedicated machine.
Pouches per shift and hours run per day. Cycle rate is theoretical, so plan with 70 to 85 percent efficiency.
Two to five working days with a complete package; if the film is new, expect a material trial before the configuration is fixed.
● Comprehensive Guide to Plastic Pouch Making Machine — how each machine family is built.
● Zipper Bag Making Machine Problems and Solutions — sealing, alignment and leakage fixes.